1 7

Zevpoint Polar Pro 7.2kW EV Charger | Adjustable Current | Built-in RCD + 6mA DC Protection | OTA Updates, Smart App, RFID, BT | IP66

Zevpoint Polar Pro 7.2kW EV Charger | Adjustable Current | Built-in RCD + 6mA DC Protection | OTA Updates, Smart App, RFID, BT | IP66

Rs. 31,999.00
Rs. 31,999.00
Sale Sold out
Free Shipping. GST Included

Discover the Polar Pro, where functionality meets elegance. Finished in a sophisticated Arctic White, this wall-mounted charger not only elevates your charging experience but also adds a modern aesthetic to your space. Equipped with an emergency switch for added safety, the Polar is designed for peace of mind and convenience.

Enjoy the versatility of its 3-in-1 charging modes—Plug & Charge, RFID, or the intuitive Zevpoint Home Mobile App. With advanced Bluetooth connectivity, managing your charging sessions is effortless, whether you're at home or on the go. Experience fast, reliable charging with Polar’s 7.2 kW capacity, crafted to meet all your EV needs.

Engineered for reliability and style, the Polar Pro is the perfect addition to any EV-friendly space


Specifications & Installation
  • Output: 7.2kW
  • Current Options: Switchable between 8-32A
  • Input Voltage: 220-240V
  • Cable Length: 5 meters
  • Connector Type: Type 2 (IEC 62196)
  • Dimensions: 322mm x 188mm x 119mm
  • Weight: 6.5 kg
  • Operating Temperature: -35°C to +60°C
  • Safety Features: Overheat prevention, Short circuit protection grounding, water resistance, dust resistance

Installation Requirements

  • Power: A dedicated single phase power source with adequate connected load is required for optimal performance
  • Wiring: Use a minimum of 6 square mm, 3-core copper cable to handle the electrical load safely. In hot environments, consider using a 10 square mm copper cable.
  • Earthing: Ensure the power point is properly earthed to prevent electrical hazards.
  • Circuit Breaker: Install a 40A double/two-pole MCB (Miniature Circuit Breaker), Surge Protection Device (SPD), RCD (Residual Current Device) to protect against power surges and electrical faults.
  • Voltage Stabilizer: If facing frequent input power fluctuations, use an appropriate voltage stabilizer.
Instructions to Use

1. Preparation
  • Ensure your charging area is dry and free from obstructions.
  • Verify that the socket you'll be using is properly earthed to ensure safety during charging
2. Setting Up the Charger
  • Unpack the Polar charger.
  • Wall-mount the charger as per the instruction guide
  • Connect the power cable to the MCB
3. Selecting the Current
  • Connect the charger to the Mobile App as per the instructions manual
  • Choose a lower current setting if you are unsure about the power capacity of your socket
4. Connecting to Your EV
  • Plug the Polar Pro charger's connector into your electric vehicle's charging port.
  • Ensure the connection is secure and the plug is properly seated.
5. Starting the Charge
  • Once connected, the charger will automatically begin charging your vehicle. 
  • In case Plug & Charge is not activated, you can start charging by tapping the RFI Card below the screen or by using the Mobile App
  • The LCD screen on the charger will show the charging status
6. Ending the Charge
  • Once your vehicle is fully charged, or if you need to stop charging, switch off the charger from the socket before unplugging it from your vehicle.
  • You can also stop the charging by tapping the RFID card or stopping the session from the mobile app
  • Carefully disconnect the charger from your EV and store it safely
7. Safety Precautions
  • Always use a properly earthed socket to avoid electrical hazards.
  • Ensure a Surge Protection Device (SPD) and a Residual Current Breaker (RCB) are installed to protect against power surges and electrical faults.
  • Do not use the charger if it or any of its components appear damaged.
  • Keep the charger away from water and extreme temperatures.
  • Follow all local regulations and guidelines regarding EV charging

By adhering to these instructions, you can ensure a safe and efficient charging experience with your Polar Pro Wall-Mounted EV charger

Shipping, COD & GST Invoice
Shipping Policy
  • Processing Time: All orders are processed and shipped within 24 hours of receipt, ensuring that you receive your products as quickly as possible.
  • Tracking Details: We highly recommend providing your email address at the time of booking to receive timely updates and tracking information for your shipment.
Cash on Delivery (COD)
  • We provide the customer with a Cash on Delivery (COD) across India. To place an order on COD, kindly reach out to us +91 9779750538
  • For COD, we charge a small confirmation amount from the customer. The Balance amount is to be paid at the time of delivery. 
GST Invoice

  • If you require a GST invoice for your order, please email your request along with the necessary details to our customer support team at support@zevpoint.com. We will ensure your invoice is processed and sent to you promptly.

For any further assistance or inquiries regarding shipping, feel free to contact our customer support team. We are committed to ensuring your satisfaction and delivering a seamless shopping experience.
View full details